Global 90 CF is a 90 cms wide conventional flue fire that can be inserted directly into a standard chimney opening without the need for flue pipes or liners. This substantially reduces the cost of installation. Global 90 is also a frameless fire, with two optional frames called Alpha and Beta.
Global 90 has a heat output of 4.3 kW, sufficient for an average to large living room. You can have fire beds in twigs or pebbles and there is an electronic remote control with thermostat and timer. The fire will also run on both natural gas and LPG.
And with its good looks, stunning flame picture and selection of design options, Global 90 is the gas fire of choice for all discerning buyers.
[ view entry ] ( 1 view ) | permalink
"The UK could face power shortages in the years ahead, according to the energy regulator, Ofgem." (from BBC news 3rd Feb 2010).
Maybe now is the time to consider a wood burning stove. A stove is not dependent upon gas or electricity, both needed if you have a gas central heating system. Not only that burning wood is considered to be Carbon Neutral, so you are doing your bit for the environment.
Today's stoves are both attractive and highly efficient, with most giving efficiencies of over 75%. For any advice on stoves please call us on 01992 815972.
[ view entry ] ( 2 views ) | permalink
The TOR is the new contemporary wood burning stove from Charnwood. Three gently curved glass panels offer a spectacular view of the fire from the front and from the sides whilst a highly advanced combustion system ensures exceptional clean burning and outstanding efficiency.
[ view entry ] ( 4 views ) | permalink
We are pleased to announce that LAURA ASHLEY fireplaces will shortly coming to Ash & Embers in Abridge. Manufactured under license by Katell, one of the leading fireplace manufacturers in the UK, Laura Ashley have created a stunning range of fires and fire surrounds using the finish solid woods, marble and stone.
The new designs will shortly feature on the Ash & Embers web site, and a selection will be on display in the showroom.
[ view entry ] ( 7 views ) | permalink
We have been asked to provide some information on how to light a wood burning or multifuel stove. This information is particularly useful in very cold weather.
How to light your stove
People may think that lighting your stove is easy and when you know how to it is. Using the right kindling and using the right seasoned wood can also help light your stove and keep it burning for longer.
Before we get down to lighting the fire, it is helpful to understand some differences between ordinary fires and wood burning stoves:
1. The wood burning stove is in an enclosed metal box. It therefore takes a lot of heat energy to get it hot (particularly if it is made of cast iron )
2. Air intake is controlled by one or more valves
3. The design means you can preheat the air so the stove burns much hotter than a conventional wood fire
4. The wood stove is therefore much more efficient in terms of converting fuel to heat energy than an ordinary fire
Preparing your fire
With most fires you are able to light it with newspaper or you can use firelighters depending on what you wish to use
With a wood stove it is good to light the new fire on a bed of ash so don't remove all the old ash when preparing the fire. Open the stove door and add several sheets of scrunched up paper to the top of the ash. Some people prefer to roll the paper into a cylinder then twist the ends together.
Next add small bits of Kindling, on top of your paper or firelighter, Kindling is any easy burning material but typically a soft wood like pine chopped into small pieces with a hand axe. Firelighters are typically made of paraffin wax. Some manufacturers add small amounts of kerosene or other light fuel to the wax in order to make them burn better.
Have larger pieces of dry, seasoned wood ready to add as the fire catches hold.
Your wood burning stove may typically have both a primary and secondary air input controls or valves When lighting the stove these should both be open in order to get as much oxygen to the fire as possible.
The Primary Air Input Valve, brings cold air from the room under the burning wood. The Secondary Air Input Valve takes air which has circulated around the stove and over the front viewing glass (helping to remove soot and keep it clear).
This means the secondary air is already very hot when it meets with the hot gases from the burning wood. The gases therefore ignite in the upper part of the stove making the stove much hotter and releasing more heat energy from the wood than with a conventional, open fire.
Making sure your wood is seasoned
Having seasoned wood helps to keep your fire in better condition if its too wet the stove will not burn as well and it may also cause problems with the chimney causing it to clog up with tar. Seasoning typically takes about a year for newly felled wood.
[ view entry ] ( 1 view ) | permalink
Calendar
